VISIONVENT S PRO | ROOF VENT | 280 × 280 MM

Regular
$189.00
Sale
$189.00
Regular
Sold Out
Unit Price
per 

The MPK VisionVent S pro is a small roof vent made in Germany for a 280 × 280 mm roof cutout. It fits where a bigger hatch will not, like above the kitchen or in the bathroom, and keeps fresh air moving through your van even when it is closed.

Its design fights condensation: the ventilation is covered in the inner hood, an air cushion reduces droplets and channels drain the water away. The aerodynamic hood keeps driving noise and drafts low.

Key Features

  • Smoked dome: Tinted hood that reduces heat and glare and protects your interior from UV
  • Continuous ventilation: Fresh air keeps flowing even with the vent closed
  • Condensation control: Covered ventilation, air cushion and drain channels
  • Double pleated blind: Blackout blind and insect screen built into the inner frame
  • Quiet on the road: Aerodynamic hood for less driving noise and drafts

Specifications

Frame colour Signal white
Roof cutout 280 × 280 mm (11.02″ × 11.02″)
Corner radius 18 mm (0.71″)
Roof thickness 42–72 mm (1.65″–2.83″)
Hood 380 × 395 mm (14.96″ × 15.55″)
Height above roof 80 mm (3.15″)
Inner frame 340 × 365 × 32 mm (13.39″ × 14.37″ × 1.26″)
Continuous ventilation 75 cm²
Recommended max speed 130 km/h (81 mph)
Weight 1.7 kg (3.7 lb)
Materials Polypropylene frame, polycarbonate and polypropylene dome
Approval ECE R43
Included Hood with upper frame, mounting frame, inner frame with double pleated blind
Screws (not included) 8 × 3.5 mm pan head, length = roof thickness + about 10 mm

Important: Screws and sealant are not included. Mount on a flat roof only, with the openers facing the direction of travel. Never step on the dome and close it in rain or snow.

Small vent, big difference on humid mornings. We install roof vents at our van conversion shop in Gatineau, near Ottawa. Contact us to book your installation.

Product Information

🌙 Built-in blind

Every roof hatch comes with an integrated pleated blind to block the light when you want darkness.

🛡️ UV protection

Tinted domes protect against UV rays and reduce glare and heat inside the van.

🦟 Insect screen

Every roof hatch includes an insect screen.

🚗 Built for the road

Recommended maximum speed: MPK VisionStar M, 160 km/h. MPK VisionStar L, 160 km/h installed crosswise and 130 km/h lengthwise. MPK VisionVent S Pro, 130 km/h. MPK domes are impact resistant polycarbonate.

🇩🇪 Made in Europe

MPK VisionStar roof hatches are made in Germany. The electric roof hatch is made in Europe and meets ECE standards for UV and impact resistance.

📐 Sizes available

🧩 Accessories

  • LED inner frame: For MPK VisionStar M and L, adds warm white 12V LED lighting
  • Expansion ring: For the electric roof hatch on roofs 70 to 84 mm thick
  • Spoiler: Reduces wind noise when the front of the hatch faces oncoming air. MPK does not recommend a spoiler with its roof hatches.

🔩 Before you install

  • Roof thickness: MPK VisionStar M and L, 25 to 60 mm. MPK VisionVent S Pro, 42 to 72 mm. Electric roof hatch, 30 to 70 mm, or 70 to 84 mm with the expansion ring.
  • MPK roof hatches need sealant and screws, which are not included.

🛠️ Professional installation

We install roof hatches at our van conversion shop in Gatineau, near Ottawa.