TRANSIT (2015+) 130″/148″/148″ EXT | DOUBLE SLIDING WINDOW | DRIVER FRONT
- Regular
- $1,063.00
- Sale
- $1,063.00
- Regular
- $1,104.00
- Unit Price
- per
BLACK FRIDAY 2026 · NOVEMBER 9 – DECEMBER 2
00
Days
:00
Hours
:00
Mins
:00
Secs
Installed behind the driver, this double sliding window brings fresh air and natural light to the front of your van’s living area. Open the front panel, the rear panel or both to control the airflow. This window is for the driver side front of the 2015+ Ford Transit.
Key Features
Specifications
| Part Number | TL201-DS |
| Vehicle | Ford Transit (2015+) |
| Wheelbase | 130″/148″/148″ EXT |
| Roof | Medium and high roof (does not fit low roof) |
| Position | Driver front |
| Size | 1367 × 741 mm (53.82″ × 29.17″) |
| Slider opening | 330 × 403 mm (13.0″ × 15.9″) |
| Note | Requires removing part of the inner stamped sheet metal. |
Professional van window installation available at our shop in Gatineau, near Ottawa. We cut the opening, install the window and finish the edges for you.
Van Windows Direct builds each window for a precise OEM fit, using the factory stampings of your van for placement and the cut line.
Grey solar privacy tint that replaces the old green tint look, for a cleaner appearance and better privacy. The UV filter rating of each window is listed in the description.
Automotive tempered safety glass.
Each window is bonded to the van body with urethane like a factory window, for a sealed, rattle-free finish. Fixed, sliding or awning: the type of opening is listed in the description.
Manufacturer warranty of 1 year.
Each window is made for one van, one position and specific wheelbases. Year, wheelbase, roof and position are listed in the description, with any fitment note. Window alignment may vary depending on vehicle curvature, window style and installation method.
Many positions require removing part of the inner stamped sheet metal. File and deburr the cut edges, then prime or protect the exposed steel and clean all metal debris from the cavity.
Trim-Lok edge trim covers the cut edge around the opening. Choose the Trim-Lok made for your van and window position, and install it before the window.
Dry-fit the window and check the clearance, then bond it with automotive glass urethane and primer. Tape and support the window during cure. Do not drive until the urethane has fully cured, according to the urethane manufacturer's instructions.