TRANSIT (2015+) 130″/148″/148″ EXT | AWNING WINDOW | DRIVER BACK DOOR

Regular
$690.00
Sale
$690.00
Regular
$897.00
Sold Out
Unit Price
per 
SKU VWD-TL215-AW

Installed in the back door, this awning window brings fresh air and natural light to the rear of your van, where you often find the bed or the garage. The glass opens outward on gas struts. This window is for the driver back door of the 2015+ Ford Transit.

Key Features

  • Opening: Awning panel on gas struts
  • Screen and shade: Built-in retractable bug screen and pleated shade
  • Glass: 5 mm solar privacy glass, 12% UV transmission
  • Installation: Urethane bonded

Specifications

Part Number TL215-AW
Vehicle Ford Transit (2015+)
Wheelbase 130″/148″/148″ EXT
Roof Medium and high roof (does not fit low roof)
Position Driver back door
Size 829 × 795 mm (32.64″ × 31.30″)
Awning opening 380 × 420 mm (14.96″ × 16.54″)
Note Fits vans with or without a factory back door window. Requires removing part of the inner stamped sheet metal of the back door. May not fit some rear-mounted racks or cargo boxes.

Professional van window installation available at our shop in Gatineau, near Ottawa. We cut the opening, install the window and finish the edges for you.

Product Information

🏭 Built to factory specs

Van Windows Direct builds each window for a precise OEM fit, using the factory stampings of your van for placement and the cut line.

🕶️ Grey solar privacy glass

Grey solar privacy tint that replaces the old green tint look, for a cleaner appearance and better privacy. The UV filter rating of each window is listed in the description.

🛡️ Tempered safety glass

Automotive tempered safety glass.

🔒 Bonded like a factory window

Each window is bonded to the van body with urethane like a factory window, for a sealed, rattle-free finish. Fixed, sliding or awning: the type of opening is listed in the description.

✅ 1-year warranty

Manufacturer warranty of 1 year.

⚠️ Check your van and window position

Each window is made for one van, one position and specific wheelbases. Year, wheelbase, roof and position are listed in the description, with any fitment note. Window alignment may vary depending on vehicle curvature, window style and installation method.

✂️ Preparing the opening

Many positions require removing part of the inner stamped sheet metal. File and deburr the cut edges, then prime or protect the exposed steel and clean all metal debris from the cavity.

🔲 Trim-Lok sold separately

Trim-Lok edge trim covers the cut edge around the opening. Choose the Trim-Lok made for your van and window position, and install it before the window.

🔧 Bonding the window

Dry-fit the window and check the clearance, then bond it with automotive glass urethane and primer. Tape and support the window during cure. Do not drive until the urethane has fully cured, according to the urethane manufacturer's instructions.

🧰 What you need

  • Urethane window adhesive and glass primer
  • Urethane gun (12:1 ratio minimum)
  • Window securing tape
  • Glass suction cups
  • Surface cleaner and prep materials