SPRINTER (2007+) 144″/170″/170″ EXT | TRIM RING | PASSENGER SLIDING DOOR
- Regular
- $235.00
- Sale
- $235.00
- Regular
- $263.00
Sold Out
- Unit Price
- per
The trim ring finishes the inside of your window opening. It hides the cut edges of the wall and gives a clean, finished look around the window. This trim ring is for the passenger sliding door position of the 2007+ Mercedes-Benz Sprinter.
Key Features
- Window pocket: Creates a clean pocket where your wall panels end
- Finish: Cover it with fabric or leave the black finish exposed
- Installation: Presses into place once the window is installed
- Windows: For sliding and awning windows. Too small for a fixed window. Not for clamp-ring vent windows (dual-vent or T-vent)
Specifications
| Part Number | SR101-BR |
| Vehicle | Mercedes-Benz Sprinter (2007+) |
| Wheelbase | 144″/170″/170″ EXT |
| Roof | Low and high roof |
| Position | Passenger sliding door |
| Material | Black-coated aluminum |
| Outside dimensions | 1223.6 × 662.1 mm (48.17″ × 26.07″) |
| Inside dimensions | 1173.6 × 612.1 mm (46.20″ × 24.10″) |
| Depth | 60 mm (2.36″) |
We install van windows and their trim rings at our shop in Gatineau, near Ottawa. We cut the opening, install the window and finish the inside for you.
Product Information
A Clean, Finished Look
Window framing creates a clean transition between the window and your finished wall panel. Depending on the model, it covers the cut edge of the opening or serves as a guide to cut a precise panel opening. Each product description explains what the frame does.
Made to Fit Your Window
Each frame or trim ring is designed for a specific window model, so it fits tight around the window for a seamless, factory-style look in Sprinter, Transit, ProMaster and other van conversions.
Built for the Road
Durable, lightweight construction that handles the vibrations and daily use of life on the road, trip after trip.
Saves Time
No custom fabrication needed. The right frame for your window lets you finish the interior quickly and move on with your build.
Compatibility
Each frame is window-specific and fits one window model or one window position only. Some frames require a specific wall panel thickness, others mount without interior panels, and some are designed for glue-in windows only. Check the model number on your window, packaging or invoice, and read the product description before ordering. Do not choose a frame based on the window's appearance alone.
Before You Install
Test-fit the frame before drilling, trimming the interior panel or permanently attaching any component. The fit can vary with your wall panel, upholstery and insulation thickness, the window opening and your interior finishing method.
Interior Finishing Only
Window framing is an interior finishing component. It does not replace the window's structural mounting system, clamp ring, sealant or exterior weatherproofing, and it does not correct an incorrectly sized window opening.
Professional Installation
We install windows and interior window framing at our shop in Gatineau, by appointment. Contact us at info@lonavity.ca to book your installation.