SPRINTER (2007+) 144″/170″/170″ EXT | SLIDING WINDOW | SLIDING DOOR
- Regular
- $718.00
- Sale
- $718.00
- Regular
- $759.00
- Unit Price
- per
BLACK FRIDAY 2026 · NOVEMBER 9 – DECEMBER 2
00
Days
:00
Hours
:00
Mins
:00
Secs
Installed in the sliding door, this sliding window brings fresh air and natural light to the living area of your van, right where the kitchen and seating usually are. The half slider opens for airflow while driving or at camp. This window is for the passenger sliding door of the 2007+ Mercedes-Benz Sprinter.
Key Features
Specifications
| Part Number | SR101-SE |
| Vehicle | Mercedes-Benz Sprinter (2007+) |
| Wheelbase | 144″/170″/170″ EXT |
| Roof | Low and high roof |
| Position | Sliding door |
| Size | 1402 × 777 mm (55.20″ × 30.6″) |
| Slider opening | 515 × 525 mm (20.28″ × 20.67″) |
| Note | Requires removing part of the inner stamped sheet metal. Check sliding door clearance if the van has aftermarket flares or capsules. |
Professional van window installation available at our shop in Gatineau, near Ottawa. We cut the opening, install the window and finish the edges for you.
Van Windows Direct builds each window for a precise OEM fit, using the factory stampings of your van for placement and the cut line.
Grey solar privacy tint that replaces the old green tint look, for a cleaner appearance and better privacy. The UV filter rating of each window is listed in the description.
Automotive tempered safety glass.
Each window is bonded to the van body with urethane like a factory window, for a sealed, rattle-free finish. Fixed, sliding or awning: the type of opening is listed in the description.
Manufacturer warranty of 1 year.
Each window is made for one van, one position and specific wheelbases. Year, wheelbase, roof and position are listed in the description, with any fitment note. Window alignment may vary depending on vehicle curvature, window style and installation method.
Many positions require removing part of the inner stamped sheet metal. File and deburr the cut edges, then prime or protect the exposed steel and clean all metal debris from the cavity.
Trim-Lok edge trim covers the cut edge around the opening. Choose the Trim-Lok made for your van and window position, and install it before the window.
Dry-fit the window and check the clearance, then bond it with automotive glass urethane and primer. Tape and support the window during cure. Do not drive until the urethane has fully cured, according to the urethane manufacturer's instructions.