SLIDING WINDOW 864 MM × 279 MM/34″ × 11″ | PASSENGER SIDE | 12V DUAL FAN
- Regular
- $456.00
- Sale
- $456.00
- Regular
- $483.00
Sold Out
- Unit Price
- per
This half-slider window has two 12V exhaust fans that pull stale air out of your van, even when the window is closed. Slide it open for more airflow, with the screen keeping bugs out.
Key Features
- Part Number: VW3310RF
- Position: Passenger side
- Exhaust Fans: Two 12V dual-switched fans, removable fan boxes for maintenance
- Opening: Half-slider for adjustable airflow
- Glass: Solar privacy glass, 17% UV
- Bug Screen: Built-in
- Seal: Foam seal for weather protection
- Installation: Clamp ring for 1/8″ wall thickness, on flat metal or fiberglass panels
Specifications
| Outside Frame Dimensions | 864 × 279 mm (34″ × 11″) |
| Cut-Out Dimensions | 838 × 254 mm (33″ × 10″) |
| Slider Opening | 356 × 197 mm (14″ × 7-3/4″) |
| Fan Specifications | 0.21 A, 2100 RPM, 325 CFM |
| Noise | 58 dB at 12″ (30 cm) |
| Manufacturer Warranty | 1 year |
Professional van window installation available at our shop in Gatineau, near Ottawa. We cut the opening, install the window and finish the edges for you.
Product Information
🛏️ Made for Sleeping Areas
Universal windows are sized for the tight wall sections near beds, cabinets and sleeping platforms, bringing light and fresh air right where you rest.
🌬️ Fresh Air and Ventilation
Awning, slider and hydraulic strut models let you control airflow. Awning windows can even stay cracked open during light rain, keeping your van fresh overnight.
🦟 Insect Protection
Many models include an integrated insect screen, and some add an insulated blind for privacy and shade. Each product description lists what is included.
🛡️ Built for the Road
Sturdy frames and rubber or foam seals keep wind, rain and dust out, and stay solid through the vibrations of daily driving.
🚐 Universal Fit
Not tied to one van model, these windows work in Sprinter, Transit, ProMaster and most other van conversions and custom builds.
📏 Check the Measurements
Universal windows are measured by their outside frame dimensions. The cutout size, wall thickness range and installation method of each window are listed in the product description. Measure your wall, including insulation and interior panels, before ordering.
🔧 Installation Methods
Depending on the model, the window is held by a clamp ring that compresses the exterior seal against the van wall, or bonded with automotive urethane adhesive. Always dry-fit first. Tighten clamp ring fasteners gradually in an even pattern, and let urethane cure fully as specified by the adhesive manufacturer.
⚠️ Fitment Note
Window alignment may vary depending on vehicle curvature, window style and installation method.
🛠️ Professional Installation
We install windows at our shop in Gatineau, by appointment. Contact us at info@lonavity.ca to book your installation.