TRANSIT | ROOF RACK MOUNTING BRACKETS | ALUMINUM | SET OF 2
- Regular
- $39.00
- Sale
- $39.00
- Regular
- $39.00
Sold Out
- Unit Price
- per
Free delivery
These 1/4″ powder-coated aluminum brackets are made to install a roof rack on the Ford Transit. They fit 8020 rails and are sold in a set of 2.
Key Features
- 1/4″ aluminum: High-strength and powder-coated
- 8020 rail fit: Made for 8020 rail roof racks
- Set of 2: One bracket per side
Specifications
| Vehicle | Ford Transit |
| Material | 1/4″ high-strength aluminum, powder-coated |
| Compatibility | 8020 rails |
| Bolts | M8, generally 25 to 35 mm long (not included) |
| Sealing | Butyl tape and silicone recommended around the mounting points |
| Quantity | Set of 2 |
A clean, solid start for your Transit roof rack.
WARNING
Ignoring the following warnings may result in the rack detaching from the vehicle, leading to serious injury or death.
- Do not exceed a load of 40 lb on each tower.
- Do not extend any component more than 4″ beyond the front or rear towers.
- Do not install a rooftop deck or climb on the rack.
- Use all available attachment points on the van roof.
- Do not exceed the maximum roof load specified by your van manufacturer.
- Inspect and tighten all hardware after the first 160 km and every 800 km thereafter. Check the overall integrity of the rack monthly or every 800 km, whichever occurs first.
- The van owner and/or installer assume all risks associated with rooftop-mounted items and components.
- If unsure, submit photos to info@lonavity.ca for evaluation before final installation or use.
Product Information
💪 Built to carry the load
The roof racks, roof rails and cross bars support up to 500 lb each. Load up your solar panels, cargo box, awning or rooftop gear with confidence, kilometre after kilometre.
🧱 No weak points
The racks are made from high-pressure molded aluminum extrusions in one solid piece, with double-thick reinforced corners. No bent aluminum, no weak spots, just full strength across the whole rack.
🛡️ Made to last for years
Aluminum will not rust. Anodized rails, powder-coated deck panels and brackets, and stainless steel parts stand up to harsh weather, road vibration and daily use, season after season.
🪶 Strong but light
High-strength aluminum gives you all the strength you need without adding unnecessary weight to your roof, so you keep more of your payload for your gear.
🔀 One system that grows with you
Every piece works together. Start with rails or a rack, then add cross bars, deck panels, a ladder or accessories as your build grows.
🌬️ Quiet on the highway
The low-profile design and front fairing cut wind noise and drag, for a quieter, smoother drive.
🪜 Safe roof access
The ladders have wide anti-slip steps for secure footing every time you climb up to load gear or clean your solar panels.
🚐 Check your van
Each product is made for specific vans. Check the model, year, wheelbase and roof height in the product description before ordering.
⚖️ Roof load
Never exceed the maximum roof load specified by your van manufacturer. Include the weight of the rack, decking and every accessory installed on your roof.
🔩 Mounting hardware
What is included and what you need for installation is listed in each product description.
🛠️ Professional installation
We install roof racks, rails, ladders and roof accessories at our van conversion shop in Gatineau, near Ottawa.
🔧 Inspect regularly
Inspect and tighten all hardware after the first 160 km of driving, then at the interval listed in the product description.
🛣️ After rough roads
Check your setup again after rough-road travel, or if you notice movement, vibration or unusual noise.
🚫 Walk with care
Do not walk directly on unsupported crossbars, solar panels or other roof accessories.