SPRINTER (2007+) 144″ | TRIM-LOK PASSENGER REAR | FIXED/SLIDER WINDOWS
- Regular
- $44.00
- Sale
- $44.00
- Regular
Sold Out
- Unit Price
- per
The Trim-Lok edge trim covers the bare metal edge of the window opening cut in your van. This kit is for the passenger rear window of the 2007+ Mercedes-Benz Sprinter, with a fixed or slider window.
Key Features
- Part Number: 1610SB3-343-SPR-PS3-144-FT16
- Vehicle: Mercedes-Benz Sprinter (2007+)
- Wheelbase: 144″
- Position: Passenger rear
- Windows: Fixed and slider windows
Specifications
| Material | Flexible PVC with steel reinforcement, UV and weather resistant |
| Color | Black, textured |
| Wall thickness | 1/8″ to 1/4″ |
| Trim size | 11/16″ (17.5 mm) high × 1/2″ (12.7 mm) wide |
| Length | 16 ft (4.88 m), with extra length to cut to fit |
| Installation | Push-on. Install before the window is bonded. |
| Sold | Per window section, not per foot |
Professional van window installation available at our shop in Gatineau, near Ottawa. We cut the opening, install the window and finish the edges for you.
Product Information
🏭 Trim-Lok, the edge trim specialist
Trim-Lok has been making push-on edge trim and seals for 50 years.
🔲 Clean finish inside and out
Caps both the inner and outer wall skins and hides bare metal, rough cuts and paint chips around the opening.
🌦️ Built for the outdoors
Flexible PVC, UV and weather resistant.
👷 Trusted by professionals
One of the most popular finishing accessories used by van upfitters, camper van builders and conversion shops.
🪟 For bonded van windows
Made for VWD windows bonded with urethane: fixed, slider and awning windows.
⚠️ Check your van and window type
Each Trim-Lok is made for one van, one window position and specific window types. Some positions use a different Trim-Lok for fixed windows and for slider or awning windows. Everything is listed in the description.
🛠️ Install before the window
Trim-Lok presses onto the cut edge. Install it right after cutting the opening, before the window is bonded. Installing it afterwards is very difficult.
✂️ Test fit first
Each kit comes with extra length to cut to fit. Foam tape or insulation too close to the edge can be trimmed back so the molding seats properly.