PROMASTER (2014+) 118″/136″/159″/159″ EXT | FIXED WINDOW DRIVER BACK DOOR
- Regular
- $207.00
- Sale
- $207.00
- Regular
- $235.00
Sold Out
- Unit Price
- per
SKU
RL314-F
The fixed window lights up the back of your van and lets you see behind. This window is for the driver back door of the 2014+ Ram ProMaster.
Key Features
- Part Number: RL314-F
- Vehicle: Ram ProMaster (2014+)
- Wheelbase: 118″/136″/159″/159″ EXT
- Roof: Low and high roof
- Position: Driver back door
- Size: 826 × 665 mm (32.52″ × 26.18″)
- UV filter rating: 17%
Professional van window installation available at our shop in Gatineau, near Ottawa. We cut the opening, install the window and finish the edges for you.
Product Information
🏭 Built to factory specs
Van Windows Direct builds each window for a precise OEM fit, using the factory stampings of your van for placement and the cut line.
🕶️ Grey solar privacy glass
Grey solar privacy tint that replaces the old green tint look, for a cleaner appearance and better privacy. The UV filter rating of each window is listed in the description.
🛡️ Tempered safety glass
Automotive tempered safety glass.
🔒 Fixed window
The window does not open. It is bonded to the van body with urethane like a factory window, for a sealed, rattle-free finish.
✅ 1-year warranty
Manufacturer warranty of 1 year.
⚠️ Check your van and window position
Each window is made for one van, one position and specific wheelbases. Year, wheelbase, roof and position are listed in the description, with any fitment note. Window alignment may vary depending on vehicle curvature, window style and installation method.
✂️ Preparing the opening
Many positions require removing part of the inner stamped sheet metal. File and deburr the cut edges, then prime or protect the exposed steel and clean all metal debris from the cavity.
🔲 Trim-Lok sold separately
Trim-Lok edge trim covers the cut edge around the opening. Choose the Trim-Lok made for your van and window position, and install it before the window.
🔧 Bonding the window
Dry-fit the window and check the clearance, then bond it with automotive glass urethane and primer. Tape and support the window during cure. Do not drive until the urethane has fully cured, according to the urethane manufacturer's instructions.
🧰 What you need
- Urethane window adhesive and glass primer
- Urethane gun (12:1 ratio minimum)
- Window securing tape
- Glass suction cups
- Surface cleaner and prep materials