EcoFlow Power Kits console touchscreen display for system monitoring and control
EcoFlow Power Kits control interface screen showing real time energy data

ECOFLOW POWER KITS CONSOLE | SYSTEM MONITORING & CONTROL

$449.00
$449.00
Sold Out

Monitor and control your EcoFlow Power Kits system in real time. The touchscreen console puts battery levels, energy data and system settings in one central place.

Key Features

  • Real-time monitoring: Battery level, input and output power, and usage data
  • Power control: Turn the system on or off directly from the console
  • Charging settings: Configure charging and discharging parameters
  • AC and DC settings: Adjust AC input and DC output
  • Touchscreen: 1024 × 600 display for direct system control

Specifications

Display Touchscreen, 1024 × 600
Screen Size 154.2 × 85.9 mm
Ports RJ45 CAN Bus, USB-C, USB-A
USB-A Output Up to 5V / 1A
Operating Temperature -20 °C to 50 °C
Dimensions 204.5 × 113.3 × 22.3 mm
Weight 450 g

Important

  • Firmware update required for 1T2 accessory compatibility
  • Minimum firmware: DELTA 3 Max Plus v7.80.98.44 or higher, DELTA 3 Ultra Plus v7.80.98.46 or higher
  • Each battery must be updated separately to complete the installation
  • Contact EcoFlow support if the firmware update is not available

Your whole power system at a glance, right where you need it.

Product Information

⚡ Built for EcoFlow Power Kits

These accessories are designed for the EcoFlow Power Kits 48V system, built around the Power Hub and EcoFlow LFP batteries. The exact compatibility of each accessory is listed in its description.

📊 Monitor and control your system

The Power Kits Console shows battery level, input and output power, and usage data on a touchscreen. It also lets you turn the system on or off and adjust charging, AC input and DC output settings.

🔗 System communication

EcoFlow components communicate through RJ45 CAN Bus ports. The LFP Battery Polarity Adapter keeps this communication working when EcoFlow LFP batteries are used with third-party 40–60V systems.

🚐 Charge while you drive

The 800W Alternator Charger and the 20 ft, 6 AWG charge cable turn driving time into charging time. The charger works with 12V and 24V vehicles and also offers battery maintenance and reverse charge modes.

🛡️ Built-in protection

The Alternator Charger protects against reverse polarity, overcurrent, short circuit, overvoltage and undervoltage.

✅ Check your system

Before ordering, check your EcoFlow model and system voltage. Compatibility is listed in each description.

🔌 Wiring and fuses

  • EcoFlow recommends an 80A inline fuse (not included) with the alternator charge cable.
  • When several battery packs are connected without a console or dongle, an RJ45 CAN Bus terminator (not included) is required.

📘 User manuals

🛠️ Installation in Gatineau

We install EcoFlow Power Kits and accessories, including wiring and fusing, at our van conversion shop in Gatineau, near Ottawa.